Page 10 - Tiling Guide Uniclass Index

5 TROWEL CHOICE
It is important to select the right type of trowel to ensure the correct bed depth and adhesive coverage is achieved.
Round Notch Trowels
Universal
• Edge Profile: 20mm round notches, 10mm deep at 28mm centres.
Solid bed
• Edge Profile: 5mm notches at 6mm centres with 3mm protruding tips above notches to ensure 4mm solid bed.
• Coverage: Approximately 100%, for most tiles.
Mosaics
• Edge Profile: 4mm square notches at 8mm centres.
• Coverage: Approximately 90% to 100%. For thin bed fixing mosaics and wall/floor tiles up to 100mm x 100mm.
BS 5385 recommends that –
• For wall tiling in internal normal conditions, the finished adhesive bed thickness should be no greater than that recommended by the tile and
the adhesive manufacturer and that maximum practical contact between tile and adhesive should be achieved. Tiles with a surface area of 0.1m2
or above should be solidly bedded. Tiles with a surface area of less than 0.1m2 but which weigh more per m2 than 70% of the background capacity to carry the weight should be solidly bedded.
• For floor tiling, solid bedding should be achieved.
• For wall and floor tiling in frequent wetting areas, tiles should be solidly bedded so that voids behind them are eliminated.
• Tiles should not be fixed using the dot and dab technique.
• Coverage: 100% achievable at 3 to 4mm bed depth. For solid bed fixing; suitable for most wall/floor tiles with lightly keyed backs.
Large format tiles
• Edge Profile: 20mm round notches, 13mm deep at 28mm centres.
• Coverage: Approximately 100%, suitable for large format tiles.
Square Notch Trowels
Thin bed
• Edge Profile: 10mm tapering notches, 5mm deep, at 12.5mm centres.
• Coverage: Approximately 100% at 2 to 3mm depth, suitable for solid bed fixing for most ceramics wall tiles up to 300 x 300mm.
08